Osmo Fit 400g
Ideal for hardening soft tap water and remineralizing ultrapure water. With a Ca:Mg ratio of 4:1 and a KH:GH ratio
from 1: 2.2. Osmo Fit contains all trace elements and is free of table salt, phosphate and nitrate. 400 g is sufficient for 4,000 l with an increase of 1° KH and 2.2° GH.
Dosage: To increase 100 l of water by 1 °dKH, you need ten grams (g) of Osmo Fit or to increase 100 l of water by 1 °dGH, you need 4.5 g of Osmo Fit.
Aquarists who care for demanding animals often use reverse osmosis water to adjust the water parameters exactly to the needs of their pets. But be careful: Reverse osmosis water must not be used pure as it no longer contains any minerals. With the Osmo Fit hardening salt, you add all the necessary minerals to the reverse osmosis water (also called deionized water) in a precisely defined ratio. Osmo Fit is free of sodium chloride, nitrates and phosphates or “fillers” and contains all trace elements found in natural waters with the exception of seawater. Osmo Fit increases hardness with a KH / GH ratio of 1: 2.2.
Contains: calcium chloride
Hazard statement: H 319: Causes serious eye irritation.
Precautionary Statement: P260: Do not breathe dust/fume/gas/mist/vapour/aerosol. P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. If possible, remove any contact lenses. Continue rinsing.